Floor (20’ Container) 2.0 Flat Panel-Bundle

This floor bundle is part of an assembly with enough material to finish 20′ container floor. The studs are 16 inches on center.

Insulating a shipping container floor with the InSoFast flat panels increases thermal performance. Just insulating between the flooring beams @ 12″ on center, the steel beams, a super conductor of thermal energy will deliver a U-Value thermal penalty of 0.109.  What that means an R-19 insulation placed between the beams the effective R-Value, will be, (1 ÷ 0.109 = R-Value of 9.17)   Adding the FP-2.0 (R-8.5) flat panels to a container floor can double performance and increase comfort. 

You will need to determine what loading (weight per square foot) is acceptable for your local building codes.

For the most part, live load and dead load values for floor systems are considered “distributed loads.” The total weight is distributed or shared uniformly by the members in the floor system. InSoFast panels are uniform because they have 100% contact with the concrete and subflooring. Our product testing determined that InSoFast panels can support 13 lbs. per square inch of compressive resistance at 10% strain deformation. This equates to 1872 lbs. per square foot for the design load, well within most residential construction specifications.

Table 3.4 is taken from the U.S. Department of Housing and Urban Development Office of Policy Development and Research’s 

Estimating and ordering is simple measure and add together how many square feet of floor surface that your container requires to complete the job. Divide the total floor (xx) footage by 40 sq-ft. this will determine the number of boxes needed. Round up to the next whole number. Don’t overestimate, cut studs, panels and inserts can be re-used.

• • One FP-2.0 Insulated Panel = (8 sq-ft)
  • One box of 5 (Insulated Panels = (40 sq-ft)

Please read all the current Shipping, Purchasing & Returns *