As the owner of an older home, you might wonder what effect insulation upgrades might have, even wondering if it is worth it to insulate interior walls. When you choose InSoFast insulation panels, the answer is clearly yes.
Energy regulations in most communities regulate what a home must have in terms of insulating exterior walls and ceilings. While you don’t often see insulation added to interior walls, it does supply advantages that many homeowners will find beneficial. Our insulation panels make it easier to enhance your home with interior room insulation without going to the trouble of ripping off drywall or other demolition.
Muffle the Noise
A loud, chaotic home can amplify stress, as any parent knows. Making your home a bit quieter is as easy as adding InSoFast insulation panels to the walls. The process is simple since our products can go directly onto the walls. The only tools required are a utility knife, saw, caulking gun, Loctite PL Premium 3X Stronger Construction Adhesive, and a can of spray foam insulation. The embedded studs supply a strong place to apply adhesive to the wall and the finishing products to the insulation panels.
Thermal Stability
Adding InSoFast insulation panels to your home will stabilize thermal energy. The closed-cell, injection-molded, non-porous EPS foam provides strong insulating strength. Your heating and cooling costs will be lower because the interior insulation will protect from thermal loss, keeping the temperature stable.
The embedded studs are non-ferrous and enclosed in insulation, so the strength of the insulation will be continuous. A system of InSoFast insulation panels works because the panels connect tightly, amplifying the effectiveness of the individual panel.
Protect Your Home’s Structure
Keeping moisture from damaging your home’s bones is as simple as installing InSoFast insulation panels. In addition to being non-porous, the panels include moisture control channels that redirect moisture and vapor away from the walls. The everyday activities of life that cause humidity won’t be able to damage your home with this insulation system in place.
Choosing InSoFast Insulation Panels
Various insulation options are available for your interior insulation project, but only one is easy and effective enough to make it worthwhile!
Fiberglass batt insulation is cheap and somewhat DIY friendly, but the wooden frame encourages thermal bridging. In addition, the project will require a good bit of demolition and construction required. The insulation also settles over time, absorbs water, and provides a breeding ground for mold, mildew, and pests.
Spray foam insulation is highly effective. It’s also very messy, expensive, and rigorous in installation. This option will require a professional installer.
InSoFast insulation panels are easily installed by the average homeowner. It’s also highly effective. Reasons to choose InSoFast insulation panels are many and include the following:
- Strong EPS foam panels (closed-cell, injection-molded)
- Built-in embedded non-ferrous studs for a rot-resistant frame
- Studs are found every 16” on center and hold up to 250 pounds each
- Built-in moisture control channels
- Built-in electric raceways that run lengthwise and sideways
- Lightweight, straightforward panel design is easy to transport and install
- Connect via tongue and groove notches on the panels’ edges
- System of insulation is continuous without thermal breaks
When you’re looking for a way to improve the life lived in your home, increase the value of your property, lower your utility bills, and quiet the noise, InSoFast insulation panels make it worth it to insulate interior walls. Call (888) 396-9677 to place an order, or check out the many videos and other resources on our website.
