Are you looking for easy-to-install insulated wall panels for the basement or interior of your new or renovated home? With InSoFast EPS continuous insulation panels, most jobs can be installed with little more than a hand saw, a utility knife, and a caulk gun!
The InSoFast UX 2.0 Panel is 2-inches thick with a flat surface that exposes the face of the embedded studs. The EPS body is manufactured with a fire-retardant additive and serves as a Class III vapor barrier.
With R-8.5 continuous insulation, rot-resistant framing, drainage channels, electrical raceways, and a simple, stackable interlocking design, this panel is a very cost-effective insulation solution for interior applications.
The tightly interlocking tongue-and-groove edges don’t need taping, and the installation of InSoFast Panels requires only a minimum of tools and supplies, including a utility knife and saw (hand, jig, skill or table).
Why Choose InSoFast Insulation Panels?
The features that make InSoFast panels so easy to use for do-it-yourselfers include:
- No special tools required; cut to fit with handsaw, handheld jigsaw or sabre saw
- Seamless interlocking edges
- Notched alignment system ensures that the panels and studs stay aligned during installation
- Built in embedded stud framing aligns every 16-inches on center to simplify gluing or screwing panels to walls
- Built in electrical raceways run horizontally and vertically along the edge of every panel
- Moisture control channels prevent moisture from getting trapped in walls
- Easy to handle 2’x4’ dimension that stacks like the LEGO®
- Install drywall, cement board, tile base, or wood siding over the panels just like over traditional framing
Ideal Solution for Basements
Concrete walls are porous and allow moisture to pass through, an important consideration when choosing insulation materials. Unfortunately, thousands of basements are finished each year with insulation products that intensify the mold, mildew and moisture problems and render the space unusable.
Spray foam can be sprayed directly onto the concrete wall (block, stone or masonry) to lock out moisture and create a great vapor barrier, but this is typically the most expensive method of basement insulation. Spray foam insulation also takes longer to install and can be a very messy affair.
Fiberglass may be popular, inexpensive and readily available but is not a good choice. It’s a complicated process, and the fact that it works like a sponge makes it a recipe for mold, rot and poor indoor air quality. Using vapor barriers is not good building practice either. If the wall gets wet for any reason, the vapor barrier will prevent it from drying.
The best and most cost-effective alternative to spray foam or fiberglass is to insulate your basement interior with closed-cell, injection-molded EPS foam panels from InSoFast!
When your project calls for interior insulated wall panels, call InSoFast today at (888) 501-7899 or contact us online to learn more about our products. We offer free shipping and our panels are designed for do-it-yourself simplicity.
