The fiberglass insulation that is most often used in homes can settle over time, becoming less and less effective. Upgrading your insulation is a great way to return your home to a state of maximum insulation, lower your utility costs, and enhance your comfort year-round. The easiest way to effectively insulate your Bloomington, MN, home is to buy and install InSoFast insulation wall panels.
It won’t take much time for this project to get done. As the name says, this insulation will go In-So-Fast. Get ready to quickly enjoy the advantages of your return to quality insulation.
Continuous insulation through a system of InSoFast insulation panels prevents the passing of air and vapor. Our insulation panels connect via tongue-and-groove notches. The fit will be airtight, and the non-permeable, closed-cell, injection-molded Expanded Polystyrene foam will protect the internal temperature of your home from sneaky drafts.
Quick and Simple Installation
Insulation that is simple to apply without sacrificing quality is what InSoFast insulation provides. The alignment will remain true easily due to the notched edges of the panels. Our panels won’t require many tools or much skill.
Bring your stack of panels, a saw to cut through the non-ferrous studs, a razor knife to cut the foam, a caulking gun, construction adhesive, and a can of spray foam insulation to be fully prepared for a fast application of quality insulation.
InSoFast insulation panels have embedded studs every 16” on center. The studs serve a dual purpose – affixing to the wall and hanging drywall on the insulation wall system. Every one of the polypropylene studs is strong enough to hold 250 pounds apiece.
Running your electric wiring will be straightforward with InSoFast insulating panels. The panels have raceways that run horizontally and vertically to run wire, and outlet boxes will fit with some easy modifications to the foam.
Interior Insulation Products by InSoFast
InSoFast insulation panels come in two series for interior use – the UX 2.0 panel and the EXi 2.5 panel. The panels are 2’x4’ by design, but the series have different thicknesses. The UX 2.0 panel is 2” thick, and the EXi 2.5 panel is 1/2” thicker. The R-value of the UX 2.0 panel is 8.5, and the R-value of the EXi 2.5 panel is 10.
Both series meet all existing and future energy regulations, can serve as a Class III vapor barrier, and include a fire-resistant additive. These interior panels also have a rot-resisting frame, electric raceways, a light and stackable design, and moisture control channels.
The exterior use panels of InSoFast insulation, EXe 2.5, have an R-value of 10. They serve as a secondary weather screen and can go straight over the existing exterior finish. Instead of raceways for wiring, these panels have drainage channels on both sides. With these panels, almost any kind of finishing material is appropriate.
InSoFast insulation panels will ship free of charge within the continental US from our facilities in South Dakota, Massachusetts, Minnesota, or South Dakota.
With InSoFast insulation wall panels in your project in Bloomington, MN, construction will be fast and easy – no matter who is doing it. Buy our insulation panels for your construction endeavors.. If you’d like more information about how InSoFast insulation panels can speed up your project and keep your wallet fat, give us a call at (888) 396-9677.
