Can I get a quote for sidewalls, end wall, ceiling and doors for a 40'Hc container

Custom quotes for complete 40-foot High Cube shipping container packages - including sidewalls, end wall, ceiling, and end doors - are obtained directly through the online InSoFast Shipping Container Quote tool or toll-free by calling (888) 501-7899.

A standard 40-foot High Cube (40' HC) container features an exterior height of 9.5 feet and contains approximately 1,200 to 1,250 square feet of corrugated interior surface area across the envelope. Uninsulated steel walls create severe condensation and continuous thermal bridging across climates in the United States, Canada, and Mexico, requiring matched panel and insert counts to seal every plane.

If you only do one thing: Submit your exact interior layout, planned door openings, and climate zone requirements through the online container quote form to ensure insert profiles match your container's specific corrugation depth.

• Sidewall package calculation: Two 40-foot sidewalls at 9.5-foot height require sidewall corrugated inserts paired with continuous 2-foot by 4-foot insulation panels to cover approximately 760 square feet of wall area.
• End wall configuration: The solid front end wall accounts for roughly 76 square feet and utilizes end-wall-specific inserts tailored to match the shallower corrugation profile on container end walls.
• Ceiling assembly: The 320-square-foot roof surface uses ceiling inserts and interlocking panels to prevent condensation where warm interior air meets the cold container roof steel.
• Cargo door insulation: Insulating the swinging cargo doors covers approximately 76 square feet using cut-to-fit panels and inserts, maintaining clearance for internal locking mechanisms and door gaskets.
• Integrated stud framing: Built-in polypropylene framing studs spaced at 16 inches on center provide 44-pound pull-out strength per fastener for attaching drywall, paneling, or cabinet backing without interior metal stud framing.
• Adhesive bonding requirements: Mounting panels and inserts to corrugated steel requires roughly two 28-ounce tubes of approved structural adhesive per 100 square feet, curing within 24 to 48 hours depending on humidity.

• Watch out for: Selecting standard-height (8.5-foot) container packages for a High Cube container, which leaves an uninsulated 12-inch gap at the top or bottom of your walls.
• Watch out for: Using generic solvent-based adhesives, which degrade expanded polystyrene (EPS) foam cores rather than forming a permanent bond to painted Corten steel.
• Watch out for: Overlooking side-to-end corrugation differences, because sidewall trapezoids are significantly deeper than standard container end-wall ribs.

Access the online Shipping Container Quote generator or contact technical support at (888) 501-7899 with your container dimensions, cutouts, and shipping address to receive a detailed bill of materials.

General information only, not medical advice. Decisions about health, treatment or wellbeing should be made with a doctor or other qualified healthcare professional.