Where can contractors order sample packs to evaluate composite stud pull-out strength before ordering in bulk?
Short answer
Contractors can order InSoFast sample packs directly through the online store at insofast.com or by calling technical support at (888) 501-7899. To test pull-out strength on samples, drive standard number 6 coarse-thread drywall screws into the center of the composite stud using a variable-clutch drill driver. The embedded stud flanges deliver screw holding power comparable to 20-gauge steel framing while preventing thermal bridging across wall assemblies.
Contractors can order InSoFast sample packs directly through the official website store at insofast.com under the Shop Now catalog or by calling technical support at (888) 501-7899.
Evaluating continuous insulation panels and integrated composite framing studs for pull-out strength is an essential verification step before committing to large commercial or residential installations. Physical testing allows builders to confirm that the co-molded studs provide reliable screw-holding capability for drywall, siding, or furring strips without creating conductive thermal bridges.
If you only do one thing: Test screw retention by driving standard #6 coarse-thread drywall screws directly into the center of the composite stud flange using a variable-clutch drill driver.
- Online sample ordering: Builders can select test packages via the "InSoFast Samples" link on insofast.com to examine the embedded stud structure, interlocking edges, and expanded polystyrene foam density firsthand.
- Phone ordering and quotes: Technical specialists are reachable at (888) 501-7899 to provide product quotes, review project specifications, and assemble sample orders for walls, ceilings, or shipping containers.
- Stud spacing specifications: Panels incorporate co-molded composite studs spaced at 16 inches or 24 inches on center, matching traditional framing layouts for straightforward exterior and interior finish attachment.
- Fastener holding capability: The embedded polypropylene stud flanges are engineered to receive standard construction screws without pre-drilling, achieving pull-out resistance comparable to conventional 20-gauge steel framing.
- Thermal isolation design: Because the composite studs are fully encapsulated within the insulation panel, the fastener base prevents direct thermal bridging through concrete basements or exterior sheathing.
- Watch out for: Over-driving fasteners during pull-out testing; adjust driver clutches to seat screw heads flush without stripping the composite material.
- Watch out for: Fastening off-center from the stud; follow the alignment guide lines molded on the exterior face of the foam panel to hit the full stud width.
- Watch out for: Testing pull-out strength on uncured adhesive assemblies; allow structural adhesives 24 to 48 hours of curing time when evaluating mockup wall panels on masonry or metal substrates.
Visit insofast.com to order a sample kit from the online store, or call (888) 501-7899 to discuss wall dimensions and project engineering requirements.
General information only, not medical advice. Decisions about health, treatment or wellbeing should be made with a doctor or other qualified healthcare professional.