The best foam board among all the insulation options for basement walls is InSoFast insulation panels. Turning your basement into a living area, playroom, game room, home gym, or other space will resolve any issues you have with adequate square footage, lower the overhead costs of your home, and make your home substantially more comfortable.
InSoFast insulation panels provide continuous insulation coverage when constructed into a building system of insulation. Since 2006, we have provided panels for professional and DIY purposes. Easy application of InSoFast insulation panels makes it a simple project to complete, and the closed-cell EPS foam promises lasting, effective, and moisture resistant results.
The InSoFast insulation panels are readily available, both online and in Menards locations throughout the Midwest. Once you place an order, we will deliver without a shipping fee straight from the factory to project sites within the Lower 48 states. With our easy to install products, your basement can be complete and ready to furnish within a very short while compared with other renovation projects.
What InSoFast Insulation Panels Provide
The non-porous insulation panels we produce connect to one another in order to create building systems of insulation. They outperform fiberglass insulation with higher R-values and connect in such a way that installation is mistake-proof. Since the panels will remain unchanged physically and chemically over time, you can be confident in the insulation for the long term.
InSoFast insulation panels connect with notched alignment edges, and they require just a bit of construction adhesive applied to the stud location and the wall. Connect each panel in a running bond pattern, and the strength of the system will grow with each panel. When you reach the other end of the wall and the ceiling, you can adjust the panels to fit with a utility knife through the foam and a saw of some sort through the studs. The only other tools you’ll need are a caulk gun to apply the construction adhesive and canned expanding foam.
The Right Products for Your Basement
By choosing InSoFast insulation panels, you can skip hiring professionals, building a wooden frame, and reworking your insulation in a few years.
The InSoFast 2.0 Flat Panel
- 24”x48”x2” dimensions
- Used for commercial and residential applications
- Built-in embedded studs with exposed faces along the surface
- R-8.5 resistance to thermal energy loss that outperforms R-13 labeled fiberglass
- Lightweight and stackable design
- Built-in moisture control channels and service channels
The InSoFast 2.5 Flat Panel
- The same benefits as the 2.0 Flat Panel
- ½” thicker
- R-10.5 outperforms R-15 fiberglass
The choice of InSoFast insulation panels meet energy regulations and facilitate wiring and drywalling.
The non-ferrous studs built into the InSoFast insulation panels are located every 16” on center and are able to support up to 250 lbs. each. The panels connect with no spaces or opportunities for energy loss. The indicator lines on the panels show where the studs lie and make installation, drywalling, and hanging mounted hardware easier.
Put your unfinished basement to better use with the best foam board insulation among all of the options for your basement walls – InSoFast insulation panels. To order, employ our online ordering system or call (888) 501-7899. A completed basement will contribute space and enhanced lifestyle to your property, increasing the property value and lowering the overhead costs.
