Are you building a new home, remodeling an older home, finishing a basement, or performing other work that requires insulation in Rochester, MN? If so, buy InSoFast insulation wall panels. We offer insulation products that are cost-effective and easy to install without sacrificing quality or durability.
One of the primary reasons to choose InSoFast insulation is that you can install them yourself. Another is that the insulation is highly effective. InSoFast insulation wall systems provide continuous insulation (CI) that meet both present and future energy codes. Our insulation outperforms batt walls that have higher R-values because of the tight fit of the system and the embedded studs that prevent thermal bridging.
InSoFast insulation panels will also facilitate running wiring for electricity, provide a built-in frame, and make hanging drywall simple.
Do-It-Yourself Simplicity
Continuous insulation built by InSoFast insulation panels operate as an entire system of 24×48” insulation panels interconnected to create a wall system of insulation. The panels are made from EPS closed-cell and injection-molded foam. They’re easily applied with construction adhesive and appropriate for use on any flat surface including floors and ceilings in addition to walls.
Mistakes happen, but with InSoFast insulation panels, they won’t. The tongue-and-groove notches make alignment and connection accurate, and this tight fit prevents the passage of vapor and air. The air that you cool or heat will stay inside, and the outdoor air will stay out of your home.
Advantages that the Novice Will Find with InSoFast Insulation Panels
- During application, you won’t need tape because the trueness and straightness will be protected by the tongue-and-groove notches.
- The panels have moisture control channels to wick away vapor and moisture, and the foam won’t soak up water allowing mold and mildew to grow.
- The built-in, embedded, non-conductive studs lie every 16 inches and are strong enough to hold 250 pounds each.
- The tools you will need include only a caulking gun, Loctite PL Premium 3X Stronger Construction Adhesive, a razor knife, a saw of your choice, and a can of spray foam insulation.
- Wiring for electricity service will be simple. You can cut the foam for an outlet box and run the wire through the raceways provided on the panels.
- The panel design is standard, easy to stack, and lightweight.
The InSoFast Interior Insulation Solutions
The base level of InSoFast insulation is the UX 2.0 panel. It is 2” thick and forms an R-value of 8.5. Continuous insulation coverage allows it to outperform competitors with an R-value of 13. All energy codes are met with this insulation option.
Next, the EXi 2.5 panel is half an inch thicker and 20% more effective. Its R-value of 10 compares to products that claim an R-value of 15.
You don’t have to hire a contractor to do the insulation on your remodel or build. Our products are easy to apply yourself – regardless of your skill level. Our website is chock full of step by step instructions, blogs, ideas, specs, articles, etc. Check out the information before you begin, and you’ll be surprised by how easy the process is.
We’re confident that you’ll realize InSoFast insulation wall panels will be perfect for your Rochester, MN, construction project. To be sure, you can try before you buy. Order a sample kit by calling (888) 396-9677. After you’re satisfied and place your full order, we will refund the price for the sample!
