Modifying shipping containers to create habitable structures in Buffalo, NY, becomes doable when you buy InSoFast shipping container insulation panels.
No matter the purpose of your shipping container creation, you’ll need insulation as a basic, must-have component. InSoFast insulation panels offer an efficient, cost-effective, and DIY-friendly material.
All of the InSoFast Insulation Products Available
Shipping containers require heavy-duty effective insulation that works with the limited space of the unit. InSoFast CX 44 shipping container panels are 2” thick, 44” long, and 24” wide. They’re not bulky or heavy, and they use as little of the unit’s area as possible.
The CX panels suit shipping containers and mirror the corrugated sides with an 11” pattern. Application ought to be horizontal where the embedded studs line up straight up and down with the ribs of corrugation. To affix the panels, we suggest Loctite PL Premium 3X Stronger Construction Adhesive. This adhesive, along with a caulk gun, utility knife, and saw are the only tools you’ll require.
Another product we offer for shipping containers is the InSert. We produce three different product lines – for side walls, end walls, and ceilings. These pieces aren’t used alone. They’re combined with interior insulation panels – either InSoFast UX 2.0 or EXi 2.5.
InSoFast InSerts are made of closed-cell EPS foam shaped to fill up the recessed spaces of the corrugation. Then, the interior panels are built into a wall of insulation over the flat surface created by the insertion of the InSerts. With no air behind the panel, this insulation is extremely effective.
The CX-LP Low-Pro embedded stud is the final insulation option. This product allows you to avoid the necessity of a bulky wooden frame as well as ordering the entire panel. Installation of this product also uses the InSerts and a rigid foam board of your choice. While you’ll save on price, this product will not include the service channels or moisture control channels common to our panels.
Benefits of InSoFast Insulation Panels
Electric wiring is easy to install when you choose InSoFast insulation panels. We offer service channels that run vertically and horizontally to make any plan of circuitry possible.
InSoFast insulation panels will soften the noise that a metal container amplifies, eliminate the damage done by condensation and vapor, and stabilize internal temperatures. Resolving each of these problems is a vital component of shipping container builds.
Our panels are made from closed-cell EPS foam. It’s a non-porous material that won’t absorb water or allow vapor or energy to seep through. The panels connect tightly and build an effective system of insulation for your project.
A Full Supply of InSoFast Insulation
Ordering the insulation required for your shipping container project is simple with the kits that we provide. We offer bundles for a 20’ or 40’ shipping container with either an 8’ or a high cube 9’ ceiling. If you have unique measurements in mind for your plan, call us with the particulars, and we’ll oblige your request.
When preparing to make an office or home from a shipping container in Buffalo, NY, buy InSoFast shipping container insulation panels. You can do so online or by dialing (888) 396-9677. Our website also provides a wealth of information about installation, measurements, troubleshooting, and even project ideas. From temperature stability to a hastened construction process, enjoy the benefits our products provide.
