Stand out in the crowd of home building by choosing a shipping container conversion project. These powerful units can be as off-the-grid or bougie as you prefer. InSoFast shipping container insulation panels work for commercial and do-it-yourself builds alike, and you can buy and ship directly from the factory to your project site in Coral Springs, FL.
If you’re building a home, you want it to be comfortable and durable.
To make your home dry, quiet, cool in the summer, and warm in the winter, incorporate quality insulation into the design – like InSoFast insulation panels.
The condensation that builds on cooled metal in radiant heat is exhibited by the example of a cold canned soda sweating on a summer’s day. Moisture such as this will create mold, mildew, and destructive corrosion.
InSoFast insulation products eliminate the potential for this condensation while mitigating its effects. The panels will not absorb water or allow vapor to pass through, and they feature drainage channels that direct any moisture away from the wall’s interior.
The thermal stability created by InSoFast insulation systems is stronger than that provided by traditional insulation.
Deep within the protection of the insulation lie polypropylene studs that function as the frame of the building. They also ensure that the insulation coverage is continuous, with no thermal bridges caused by a break.
The wonder of InSoFast insulation systems is enhanced even further by the fact that the effectiveness doesn’t diminish over time. The panels don’t break down, release toxins into the air, or provide aid to pests or rodents.
A Breakdown of the Impressive Qualities Exhibited by InSoFast Insulation
- Quick installation of an entire insulation system
- A strong insulation system that outperforms competition with higher R-value labels
- Versatile use (lines available for exterior, interior, floor, ceiling, and wall purposes)
- Assistance with service placement
- Drainage via channels
- Simple installation with minimal skill and tools
- Easily maneuverable and stackable products
The Shipping Container Insulation Panel – CX44
Designed to accommodate the corrugation of a shipping container, horizontal installation of the CX44 panel lines the built-in studs up against the interior ridges of the corrugation. Following a running bond pattern, application will be done in a short period of time.
The studs within the panels provide advantages beyond holding them in place. Made of polypropylene, the studs aren’t conductive, and they’re able to support up to 250 pounds each – including the required drywall and any other mounted hardware. With this sort of framing, your unit will have maximized useable space because you can omit the traditional wood frame you’d otherwise construct.
InSerts for Ceilings, End Walls, and Side Walls
Creating a tight system of insulation with no air trapped between the insulation and the unit’s walls is possible with InSoFast InSerts. They’re used in conjunction with your choice of our interior panels. The InSerts fill the corrugated recesses, and the UX 2.0 or EXi 2.5 panels follow.
CX-LP Low-Pro Embedded Studs
The CX-LP studs from InSoFast, LLC, provide the strong framing our panels are known for without the bulk of the entire unit. Using this product is simple. The stud lines up against corrugated ribs; InSerts fill the recesses; and your choice of rigid foam board span the distance between the insulated studs.
Should you be planning a shipping container conversion in Coral Springs, FL, pair your plans with the intent to buy InSoFast shipping container insulation panels. You can place that order online or by calling (888) 501-7899; we off standard and customizable kits for your convenience.
