Are you considering where to begin your home improvement efforts? InSoFast insulation comes as a foam board panel and offers delivery to all project sites in the Lower 48 for a solution that is always “near me,” no matter where that might be.
Non-Porous and Continuous Insulation Systems
InSoFast insulation panels come together into a wall system of continuous insulation (CI). The design of the panels promote insulation power through its closed-cell, non-porous EPS foam as well as the tight fit that the engineered panel facilitates. Being closed-cell EPS foam, the panels offer twice the insulating power as open-cell foam, and the tight connection and embedded studs allow the panel to outperform fiberglass insulation with higher R-values on the label.
The Easy Application Model
Whether professional or novice, you will be unable to discover an easier way to insulate a home. InSoFast insulation panels have tongue-and-groove alignment notches that promise to keep the wall system of installation true and straight. Tape during installation will be unnecessary since the wall system will become sturdier as it grows.
The installation itself will require a saw for cutting through the polypropylene studs, a utility knife to cut through the foam, a caulking gun loaded with Loctite PL Premium 3X Stronger Construction Adhesive, expanding spray foam, static guard for cleanup, and a stack of InSoFast insulation panels.
The easy installation and incredible strength of InSoFast insulation panels aren’t the only things that make them remarkable. The panels also create a rot-resistant frame, provide electric raceways that run perpendicular to one another, and wick away moisture through drainage channels.
The panels include polypropylene studs every 16” on center. These studs are as strong as a 20-gauge steel stud and able to support 250 pounds each. They’re also embedded within the insulation, so thermal bridging that could lessen the insulation’s effectiveness will not be a problem.
Insulation for Interior and Exterior Purposes
The Flat Panel 2.0 provides base level insulation and includes fire-resistant additives and is made from EPS foam. The panels, when composed into a wall system, result in a Class III vapor barrier that is airtight and energy efficient.
Each panel is 2’x4’ with a 2” thickness to produce an R-8.5 thermal efficiency that outperforms R-13 fiberglass insulation.
All InSoFast insulation panels provide this framing and come as a standard unit that weighs little and stacks easily.
The Flat Panel 2.5 connects tighter and navigates slight irregularities easily. These panels are ½” thicker and 20% stronger than the Flat Panel 2.0. The R-value of 10 outperforms R-15 fiberglass insulation.
Exterior insulation panels from InSoFast, LLC, attach via screws rather than construction adhesive. This panel has moisture control channels on both sides and no service raceways. When put together, the wall systems encapsulate the exterior and serve as an effective weather screen assembly without requiring remediation prior to installation.
As you consider the various foam board insulation options “near me,” remember that InSoFast insulation panels are always available online and in select Menards locations and provide easy installation and incredible effectiveness. We make our products in Idaho, Massachusetts, and Minnesota, and we will ship straight from there to your project site, as long as it’s in the continental US. Check out all of the resources that we have online or give us a call at (888) 501-7899 to explore the benefits of choosing InSoFast insulation panels.
