Looking for a recommended exterior wall insulation that outperforms most R-value? InSoFast insulation panels are an ideal solution. When pieced together into a complete unit, they provide a Continuous Insulation (CI) system. The tongue-and-groove alignment notches make installation straightforward and foolproof without fancy tools or expertise.
Exterior Wall Insulation
Well-suited for insulating the exterior walls of your home, InSoFast FP-2.5NRW (EXe 2.5) panels apply to a wide range of outdoor surfaces. The panels are 2’x4’ with a 2 ½” depth and function as a secondary weather barrier, also providing a capillary break for wooden homes and sheathing.
The R-10 level of thermal protection outperforms just fiberglass insulation labeled with R-15 strength. The panels are maximized for use outdoors, with moisture control channels on each side for airflow. The non-porous, closed-cell EPS foam will prevent moisture from permeating the insulation coverage.
Installing these panels is simple. Choose among nails or screws, construction adhesive, or masonry adhesive to attach the panels to the exterior wall. The alignment notches on the edges of the panel make adding panels to the system a breeze, negating the need for tape.
This panel combines all of the needed components within one panel, including a rain screen, insulation, flashing, and attachment. This exterior line of panels can be applied directly over an existing house wrap or weather-resistant barrier. The home will not need to be treated for lead paint or have trim removed.
Diversity of finishing and ease of installation are both key reasons to choose InSoFast insulation panels. Layered on these insulation panels, a variety of 2” cladding options will work perfectly with the FP-2.5NRW panel. Whether you choose thin brick, stucco, vinyl, or some other material, you can create a single medium look or a combination of your choice – all attached to the same built-in frame provided by our panels.
This frame does more than support the panels and the finishing materials; it also prevents thermal bridging and the loss of R-value. The frame comes from the built-in polypropylene studs embedded within the panels. Each stud can support 250 pounds each, equal to 20-gauge steel studs.
See It to Believe It
Get a feel for our panels in person by ordering a sample kit of InSoFast insulation panels. You’ll be able to see all of the unique features for yourself, and when you are convinced enough to order an entire supply for your home’s exterior, we will credit your purchase for the cost of the sample kit.
You can also browse the catalog of videos that we offer regarding InSoFast insulation products. We’ll show you how to put in the panels, different ways to use the panels, and so much more. Our website also offers access to installation instructions, specs, and other valuable resources. If, by some chance, you don’t find inspiration or suitable assistance on our website, we are also available by phone at (888) 396-9677.
The highly recommended exterior wall insulation from InSoFast, LLC, offers sufficient R-value for any climate and area. From outperforming alternative insulation products to being DIY-friendly, moisture resistant, and physically and chemically stable, this product checks all the boxes for any insulation purchase.
