If you’ve purchased a shipping container with plans to renovate and repurpose it for living, working, worshipping, or learning, plan for insulation. InSoFast shipping container insulation inserts are inventive solutions designed to fill the spaces created by corrugation for an airtight system of insulation. To learn more about this revolutionary product, keep reading!
InSoFast insulation products promote continuous insulation coverage by creating wall systems of insulation. While we started as a commercially targeted insulation product, the energy efficiency combined with the easy to install nature of our products quickly garnered a following with the home improvement crowd.
When you order InSoFast insulation products, we’ll ship directly to your project site from our factories in Massachusetts, Minnesota, and Idaho.
Shipping Container Insulation Products from InSoFast, LLC
Several InSoFast insulation products work well with shipping container projects. Each of these products is produced using closed-cell, injection-molded Expanded Polystyrene Foam. The closed-cell construction is twice as insulating per square inch than open-cell foam insulation.
Other incredible features shared among these products include the minimal tools required and the built-in frame. You’ll only need a utility knife, saw, caulk gun, construction adhesive, and canned spray foam insulation. Additionally, the studs create a frame that resists corrosion, facilitates hanging drywall, and eliminates the need for a bulky wooden frame.
Shipping Container InSerts
Available for side walls, ceilings, and end walls of shipping containers, InSoFast InSerts work to eliminate any uninsulated air between the interior of the container and the metal of the unit. Loctite PL Premium 3X Stronger Construction Adhesive adheres the sleeve of insulation within the corrugated recesses, creating a flat surface. InSoFast interior panels, either UX 2.0 or EXi 2.5 panels follow. The combination of these two products provide a strong insulated design that won’t break down, degrade, or welcome invading pests.
Shipping Container CX-LP Low-Pro Embedded Studs
Another product used in conjunction with InSerts is the CX-LP Low-Pro Embedded Stud. This product lines up on the ridges of a shipping container’s corrugation while InSerts fill the recesses and any rigid foam board runs the span from stud to stud. The benefits of this system stem from lowered cost and less bulk when shipping. The lowered cost comes with a loss of moisture control panels and raceways for running services found on InSoFast insulation panels.
Shipping Container CX 44 Insulation Panels
The CX 44 shipping container panel fits along the sides of containers. This product is simple to install. Following a running bond layout and a horizontal orientation, install these panels on an 11-inch repeating pattern.
Fully Appropriate for Shipping Container Insulation
The intended use for shipping containers is the transfer of products overseas, not for use as a home, office, etc. Modifying the container for a repurposed function requires strong insulation to overcome the conductive nature of the container’s steel composition.
InSoFast insulation products have the strength to prevent the problems associated with shipping containers, and they’ll remain effective and in place for the life of your building.
We offer kits for shipping container constructions for both 20’ and 40’ containers with standard 8’ or high cube 9’ ceilings. We can also customize a kit if your container’s measurements are unique.
Your shipping container build will be as successful as the insulation products you choose. InSoFast shipping container inserts offer complete insulation possibilities. For more info, check out our website’s vast array of resources, videos, and blogs. You can also call (888) 396-9677 with questions or to order a sample kit.
