InSoFast insulation panels should be your product of choice when you’re in the market to buy insulation wall panels for a new home construction or remodel in Atlanta, GA!
This product shifts the paradigm of insulation by increasing the quality, expanding benefits to other construction processes, and speeding up the process of installing insulation.
InSoFast, LLC was born in 2006 as a company marketing insulation to the commercial contractor niche. However, the ease of application and maneuverability combined with quality spurred a surge of popularity with the DIY crowd as well. Shipped free from our facilities in South Dakota, Minnesota, Massachusetts, and Idaho, InSoFast insulation panels will transform the way you approach each step of the construction process.
Features of InSoFast Insulation Panels
- 2×4 feet with either 2 or 2 ½ inch depth
- Non-porous, closed-cell, and injection-molded foam
- Made of Expanded Polystyrene Foam
- Built-in electric raceways
- Built-in rot resistant framing
- Series on offer for interior, exterior, and shipping container applications
- Includes non-ferrous, embedded studs every 16 inches o.c.
- Appropriate for above and below ground purposes
- Not degradable physically or chemically
- Built-in moisture control channels
- Includes pre-set cut lines with indicators present
- Tongue-and-groove interlocking notches
Understanding How the Insulation Functions
If you’re confused about how a wall system of insulation would work, we get it. The panels fit together via tongue-and-groove notches that allow for no confusion or mistakes. You should use Loctite PL Premium 3X Stronger Construction Adhesive to apply the panels using the embedded studs as well as a can of spray foam insulation to seal seams and edges.
The only tools you’ll need are a caulking gun to apply the adhesive, a utility knife to cut the foam portion of the panel, and some sort of saw to cut through the studs. You won’t have to tape the panels during the wall assembly, and the entire system will gain strength with each additional panel you install.
Understanding the Degree of Quality Provided
The way that InSoFast insulation works is another significant point. R-values demonstrate how well insulation prevents thermal loss, and the R-value generally goes up with the quality of the insulation. InSoFast insulation panels outperform the competition because of the continuous insulation provided.
The design of InSoFast insulation panels is the key to the continuous insulation provided. Since the traditional combination of wood frame and fiberglass insulation is the most common insulation approach, consider the energy loss at the site of the wood or metal stud. This break in insulation coverage significantly lessens the impact of the R-value. InSoFast insulation panels eliminate these breaks. The studs within the panels aren’t conductive, and they’re embedded fully within the insulation foam.
Other Advantages of InSoFast Insulation Panels
While the convenience of installing InSoFast insulation panels is remarkable, the benefits don’t stop there. The insulation panels improve the processes of running electric wiring, framing, and moisture protection. The electric raceways run horizontally and vertically, and the embedded studs can hold up to 250 pounds. You can hang drywall or cabinets via the built-in studs without worrying about the strength of the stud.
The decision to buy InSoFast insulation wall panels for your construction project in Atlanta, GA, will benefit your entire experience. Call us at (888) 501-7899 or order online at your convenience, and we’ll also provide help with product choice, measurements, and even troubleshooting installation.
